| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132 |
- ( pcb2gcode 1.3.2 )
- ( Software-independent Gcode )
- ( This file uses 7 drill bit sizes. )
- ( Bit sizes: [0.5mm] [0.7mm] [0.8mm] [0.991mm] [1.5mm] [2.499mm] [3.6mm] )
- G94 (Millimeters per minute feed rate.)
- G21 (Units == Millimeters.)
- G91.1 (Incremental arc distance mode.)
- G90 (Absolute coordinates.)
- S10000 (RPM spindle speed.)
- G00 Z10.00000 (Retract)
- T1
- M5 (Spindle stop.)
- (MSG, Change tool bit to drill size 0.50000 mm)
- M6 (Tool change.)
- M0 (Temporary machine stop.)
- M3 (Spindle on clockwise.)
- G81 R5.00000 Z-2.50000 F1000.00000 X0.57580 Y10.29080
- X0.57580 Y11.54080
- X0.57580 Y12.79080
- X0.57580 Y14.04080
- X0.57580 Y21.74080
- X0.57580 Y22.99080
- G00 Z10.00000 (Retract)
- T2
- M5 (Spindle stop.)
- (MSG, Change tool bit to drill size 0.70000 mm)
- M6 (Tool change.)
- M0 (Temporary machine stop.)
- M3 (Spindle on clockwise.)
- G81 R5.00000 Z-2.50000 F1000.00000 X4.38580 Y20.45080
- X4.38580 Y22.99080
- X4.38580 Y25.53080
- X4.38580 Y28.07080
- X12.00580 Y28.07080
- X12.00580 Y25.53080
- X12.00580 Y22.99080
- X12.00580 Y20.45080
- X20.89580 Y19.18080
- X25.97580 Y19.18080
- G00 Z10.00000 (Retract)
- T3
- M5 (Spindle stop.)
- (MSG, Change tool bit to drill size 0.80000 mm)
- M6 (Tool change.)
- M0 (Temporary machine stop.)
- M3 (Spindle on clockwise.)
- G81 R5.00000 Z-2.50000 F1000.00000 X6.92580 Y7.75080
- X10.73580 Y9.02080
- X10.73580 Y11.56080
- X10.73580 Y14.10080
- X6.92580 Y15.37080
- X18.35580 Y14.10080
- X18.35580 Y11.56080
- X18.35580 Y9.02080
- X17.08580 Y22.99080
- X17.08580 Y27.99080
- X24.70580 Y26.76080
- X24.70580 Y24.26080
- X32.32580 Y22.99080
- X32.32580 Y27.99080
- X34.86580 Y11.52080
- X34.86580 Y9.02080
- G00 Z10.00000 (Retract)
- T4
- M5 (Spindle stop.)
- (MSG, Change tool bit to drill size 0.99100 mm)
- M6 (Tool change.)
- M0 (Temporary machine stop.)
- M3 (Spindle on clockwise.)
- G81 R5.00000 Z-2.50000 F1000.00000 X22.16580 Y6.48080
- X22.16580 Y9.02080
- X22.16580 Y11.56080
- X22.16580 Y14.10080
- X29.78580 Y14.10080
- X29.78580 Y11.56080
- X29.78580 Y9.02080
- X29.78580 Y6.48080
- G00 Z10.00000 (Retract)
- T5
- M5 (Spindle stop.)
- (MSG, Change tool bit to drill size 1.50000 mm)
- M6 (Tool change.)
- M0 (Temporary machine stop.)
- M3 (Spindle on clockwise.)
- G81 R5.00000 Z-2.50000 F1000.00000 X42.48580 Y1.40080
- X42.48580 Y6.85080
- X42.48580 Y12.30080
- X42.48580 Y19.18080
- X42.48580 Y24.63080
- X42.48580 Y30.08080
- G00 Z10.00000 (Retract)
- T6
- M5 (Spindle stop.)
- (MSG, Change tool bit to drill size 2.49900 mm)
- M6 (Tool change.)
- M0 (Temporary machine stop.)
- M3 (Spindle on clockwise.)
- G81 R5.00000 Z-2.50000 F1000.00000 X72.33080 Y6.48080
- X72.33080 Y24.89580
- G00 Z10.00000 (Retract)
- T7
- M5 (Spindle stop.)
- (MSG, Change tool bit to drill size 3.60000 mm)
- M6 (Tool change.)
- M0 (Temporary machine stop.)
- M3 (Spindle on clockwise.)
- G81 R5.00000 Z-2.50000 F1000.00000 X62.34580 Y6.85080
- X62.34580 Y24.63080
- G00 Z10.000 ( All done -- retract )
- M5 (Spindle off.)
- M9 (Coolant off.)
- M2 (Program end.)
|
