( pcb2gcode 1.3.2 )
( Software-independent Gcode )

( This file uses 7 drill bit sizes. )
( Bit sizes: [0.5mm] [0.7mm] [0.8mm] [0.991mm] [1.5mm] [2.499mm] [3.6mm] )

G94       (Millimeters per minute feed rate.)
G21       (Units == Millimeters.)
G91.1     (Incremental arc distance mode.)
G90       (Absolute coordinates.)
S10000     (RPM spindle speed.)

G00 Z10.00000 (Retract)
T1
M5      (Spindle stop.)
(MSG, Change tool bit to drill size 0.50000 mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3      (Spindle on clockwise.)

G81 R5.00000 Z-2.50000 F1000.00000 X0.57580 Y10.29080
X0.57580 Y11.54080
X0.57580 Y12.79080
X0.57580 Y14.04080
X0.57580 Y21.74080
X0.57580 Y22.99080

G00 Z10.00000 (Retract)
T2
M5      (Spindle stop.)
(MSG, Change tool bit to drill size 0.70000 mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3      (Spindle on clockwise.)

G81 R5.00000 Z-2.50000 F1000.00000 X4.38580 Y20.45080
X4.38580 Y22.99080
X4.38580 Y25.53080
X4.38580 Y28.07080
X12.00580 Y28.07080
X12.00580 Y25.53080
X12.00580 Y22.99080
X12.00580 Y20.45080
X20.89580 Y19.18080
X25.97580 Y19.18080

G00 Z10.00000 (Retract)
T3
M5      (Spindle stop.)
(MSG, Change tool bit to drill size 0.80000 mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3      (Spindle on clockwise.)

G81 R5.00000 Z-2.50000 F1000.00000 X6.92580 Y7.75080
X10.73580 Y9.02080
X10.73580 Y11.56080
X10.73580 Y14.10080
X6.92580 Y15.37080
X18.35580 Y14.10080
X18.35580 Y11.56080
X18.35580 Y9.02080
X17.08580 Y22.99080
X17.08580 Y27.99080
X24.70580 Y26.76080
X24.70580 Y24.26080
X32.32580 Y22.99080
X32.32580 Y27.99080
X34.86580 Y11.52080
X34.86580 Y9.02080

G00 Z10.00000 (Retract)
T4
M5      (Spindle stop.)
(MSG, Change tool bit to drill size 0.99100 mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3      (Spindle on clockwise.)

G81 R5.00000 Z-2.50000 F1000.00000 X22.16580 Y6.48080
X22.16580 Y9.02080
X22.16580 Y11.56080
X22.16580 Y14.10080
X29.78580 Y14.10080
X29.78580 Y11.56080
X29.78580 Y9.02080
X29.78580 Y6.48080

G00 Z10.00000 (Retract)
T5
M5      (Spindle stop.)
(MSG, Change tool bit to drill size 1.50000 mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3      (Spindle on clockwise.)

G81 R5.00000 Z-2.50000 F1000.00000 X42.48580 Y1.40080
X42.48580 Y6.85080
X42.48580 Y12.30080
X42.48580 Y19.18080
X42.48580 Y24.63080
X42.48580 Y30.08080

G00 Z10.00000 (Retract)
T6
M5      (Spindle stop.)
(MSG, Change tool bit to drill size 2.49900 mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3      (Spindle on clockwise.)

G81 R5.00000 Z-2.50000 F1000.00000 X72.33080 Y6.48080
X72.33080 Y24.89580

G00 Z10.00000 (Retract)
T7
M5      (Spindle stop.)
(MSG, Change tool bit to drill size 3.60000 mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3      (Spindle on clockwise.)

G81 R5.00000 Z-2.50000 F1000.00000 X62.34580 Y6.85080
X62.34580 Y24.63080

G00 Z10.000 ( All done -- retract )

M5      (Spindle off.)
M9      (Coolant off.)
M2      (Program end.)